Instructions for use of eva boat floor

- Aug 29, 2019-

1, How is Komin Sport applied? 

Komin Sport is applied using a pre applied pressure sensitive adhesive (PSA). 


 2, Can Komin Sport be applied over existing non-skid? 

Komin Sport  adheres very well to most molded-in non-skids and properly applied and 

maintained aggregate type non-skid paints, as long as the surface is cleaned properly. 


 3, What colors are available? 

Stock colors are caribbean blue, bimini blue, bahama blue, midnight black, olive green, 

seafoam green, storm gray, hatteras white, cool gray, beach sand, aqua camo, army camo, 

snow camo, mica, mocha, camel, faux teak: teak over black, titanium, teak over holly, holly 

over teak. 


 

4, What is the best method to clean Komin Sport? 

Komin Sport cleans easily with soap, hot water and a stiff brush. 

A number of household products can be used such as SoftScrub, Simple Green, 409, bleach, 

etc. Please do not use an acid base cleaner such as MaryKate’s Hull Cleaner. 


5, How do I cut Komin Sport? 

Use a fresh bladed razor knife. You may have to change blades depending on the size of the 

job and the amount of cuts made. 


6, Can I get custom cut product? 

Yes, if templates or CAD drawings for each part are supplied. If it’s a rectangle such as for a 

helm pad or bolster you can supply dimensions or a sketch. 


7, What is the cost per square foot? 

Price is determined by material used and labor time. 


 8, What is the regular size I can order? 

2400mm x 1200mm in sheet form. ( 94″ x 47″ in sheet form)  for  LCL order  

2100mm x 1100mm in sheet form.  ( 83″ x 43″ in sheet form) for 1 container order 


 9, What is the life expectancy? 

Five to seven years. Longer if the boat is stored inside. 


 10, What is the warranty? 

Komin Sport marine products are warranted to be free from any defects at the time of 

purchase. The EVA has a 36 month material and workmanship warranty. The PSA cannot be 

warranted due to many outside issues that may be present during installation. 


 

11, Can I get a custom sized helm pad? 

Yes, provide dimensions and a quote will be provided. 


12, Can I get a logo on my custom helm pad? 

Yes, contact us for specific details,  

 (P) +86(0)752 2589 036, Email: sales@kominsport.com  


 

13, Can Komin Sport sheets be seamed? 

This is not recommended. Even with a very small shrink rate, a small gap between sheets will 

be present. We recommend leaving a 1/2 inch gap between panels. 


 


15, How long will it stayed adhered? 

If proper prepping has been done, you can expect at least 5-7 years of life. 


 


16, Can it be re-adhered if necessary? 

Yes, if the edge has slightly come up, use an acrylic based super glue. If the sheet has 

completely come up, you will have to clean the area thoroughly to remove any existing PSA 

and reapply another new sheet. 


 


17, If I choose to remove the pad how do I do this? 

Use a plastic putty knife to get under one corner. Grip and pull off. If the EVA seems to be 

sticking and tearing, use the putty knife to jab the area. You may want to enlist another set of 

hands to assist. Once the entire pad is removed, there will be a small amount of PSA left on 

the surface. Soak with mineral spirits for 10 minutes, scrap with the plastic putty knife. Once 

the PSA has been removed, use acetone to remove the mineral spirits 


 


18, How do I prep the surface? 

Use an ammonia based window cleaner and a scotch brite pad to remove any dirt, sunscreen, 

wax. sweat, etc. Scrub well and let dry completely. If the boat is new, you should repeat 

several times as new boats have mold release that may hinder adhesion.


eva boat flooring