marine non skid decking sheets
Closed Cell EVA foam
Grey with black / customized
2400mm*1200mm ( 94in*47in )
1. Materials: Our marine non skid decking sheets : Original, UV Protection EVA raw material. Some EVA foam sheets with low price on the market are made of recycled foaming materials, such as black color EVA foam sheets will use grade B materials.
2. Adhesive: Komin Sport developed upgraded self-adhesive according to different hardness, density and lamination of EVA materials, which have no wrinkle, strong adhesive, unique and highly cost effective. Since the authentic 3M adhesive is easy to have wrinkle in high price, while high imitation 3M adhesive also easy to have wrinkle, not strong adhesive, as well as the risk of customs seizure. In addition, the authentic 3M adhesive cannot be distinguished from the high imitation 3m adhesive in appearance.
3. Lamination: Glue lamination is the most common in the market, the advantage is low production cost. However, there are some shortcomings found by customers: gluing instability, which need to adjust by hand each time for production. In the meantime, affected by the weather temperature, it is easy to cause the bonding not strong, or reduce the useful life of the EVA marine deck.
Therefore, the way of lamination we now using it is high temperature lamination: different colors materials are fused together under the 300 degrees heat, no additives needed.
4. Quality: After our quality controlling, the EVA foams sheets we exported to our clients are free of sand hole and dirty. Please see attached comparison picture.
If you need customized color please tell me the pantone number, thank you.
You can also choose the following pattern.
How do I clean Komin Sport Marine Deck?
Komin Sport Marine Deck cleans easily with soap, hot water, and a stiff brush. For stubborn areas, a number of household products can be used. Do not use acid-based cleaners.
However a few substances, such as fuel stabilizers, bird droppings, rust, and mustard can be problematic if not attended to in a timely manner. Prompt attention to these types of spills will ensure easy removal.
If I choose to remove the pad how do I do this?
The best method is to use a plastic putty knife to get under one corner, then grip and pull off. If the EVA marine flooring seems to be sticking and tearing, apply small amounts of acetone to the PSA and continue lifting with the putty knife. You may want to enlist another set of hands to assist. Once the entire pad is removed, there will be a small amount of PSA left on the surface. Soak with mineral spirits for 10 minutes, scrap with the plastic putty knife and a rag. Once the PSA has been removed, use acetone to remove the mineral spirits.
Can I re-stick my pad?
Yes ,you can restick any pad if the edges are starting to come lose. Be sure to use
an acrylic based super glue. If the sheet has completely come off, you will need to
thoroughly clean the area and apply a new sheet.
How long will it stayed adhered?
With proper surface preparation and installation, a minimum of 5-7 years can be expected. If the boat is covered and/or well taken care of, a longer life is likely