Eva Foam marine swim platform mat
Safety: We make them non slip to make sure you can stand and walk safely on your boat. Meanwhile the material is also Eco-friendly and no harmful to human compare to PVC.
Comfortable: it is softer than other marine flooring mat materials. Low thermal conduction insulates user from uncomfortably hot and cold surfaces.
Easy installation and cleaning: The adhesive back side make installation so easy, you can install them by yourself. And it is also easy to clean just like clean your boat deck using water and soap.
If I choose to remove the pad how do I do this?
The best method is to use a plastic putty knife to get under one corner, then grip and pull off. If the EVA marine flooring seems to be sticking and tearing, apply small amounts of acetone to the PSA and continue lifting with the putty knife. You may want to enlist another set of hands to assist. Once the entire pad is removed, there will be a small amount of PSA left on the surface. Soak with mineral spirits for 10 minutes, scrap with the plastic putty knife and a rag. Once the PSA has been removed, use acetone to remove the mineral spirits.
How long will it stayed adhered?
With proper surface preparation and installation, a minimum of 5-7 years can be expected. If the boat is covered and/or well taken care of, a longer life is likely.
Can I apply Komin Sport Deck pads over existing non skid?
Yes. Komin Sport Deck pads adheres very well to most molded-in non-skids and properly applied and maintained aggregate type non-skid paints, as long as the surface is cleaned properly prior to installation. For extremely aggressive textures, we recommend sending photos or acquiring samples for testing.