Our swim platform deck pad provide several advantage compare to traditional wooden or PVC material:
Elegant and Customized outlook
Easy installation and cleaning
Boat flooring needs wear-resisting and non-deformation, anti-skid, sound-absorbing, anti-static, easy to disassemble, light body, waterproof and anti-skid,Wear-resisting and non-deformation
Dimension stability, skid resistance, sound absorption, antistatic and other indicators have reached international standards.
EVA is mainly divided into grade A, B and C material grades.
Grade A EVA is environment-friendly material (new material foaming).
Class B EVA is semi-environmental material (half new material, half recycled material).
Grade C EVA is ordinary material (recycled material).
EVA mainly depends on the surface stomatal distribution and hardness;
Few holes appear on the surface of class A EVA (basically none).
There will be some holes in the surface of class B EVA.
There are many small holes in the surface of c-grade EVA.
You can also choose the following pattern.
Can I get a custom sized helm pad?
Yes. Obtain the dimensions of the desired pad and contact our customer service department to request a quote. Customer service can be reached at firstname.lastname@example.org.
Does Komin marine flooring get hot?
As with any flooring products, darker colors will naturally become warmer in the sun. With that being said, komin marine flooring will not become too hot to stand on, and dispels heat very quickly thanks to its closed-cell structure.
Can komin marine sheets be seamed?
While marine sheets can be seamed, we do recommend against it. Over time, the PE/EVA blended material may naturally shrink up to ¼”, and for this reason, we suggest leaving a ½” gap between parts.
How long will it stayed adhered?
With proper surface preparation and installation, a minimum of 5-7 years can be expected.
If I choose to remove the pad how do I do this?
Komin marine flooring is designed for a semi-permanent installation, but can be removed. The best method is to use a plastic putty knife to get under one corner, then grip and pull off. If the PE/EVA seems to be sticking and tearing, apply small amounts of acetone to the PSA and continue lifting with the putty knife. You may want to enlist another set of hands to assist. Once the entire pad is removed, there will be a small amount of PSA left on the surface. Soak with mineral spirits for 10 minutes, scrap with the plastic putty knife and a rag. Once the PSA has been removed, use acetone to remove the mineral spirits.