Komin Sport specialized production non skid foam adhesive deck pads.
Why do you choose EVA Foam non skid foam adhesive deck pads?
EVA is a new type of environmental protection plastic foam material, with good buffer, earthquake resistance, heat insulation, moisture-proof, anti-chemical corrosion and other advantages, and non-toxic, not water absorption.
Features of EVA anti-skid mat:
Water resistance: airtight bubble structure, no water absorption, moistureproof, good water resistance.
Corrosion resistance: resistant to seawater, grease, acid, alkali and other chemicals corrosion, antibacterial, non-toxic, tasteless, no pollution.
Machinability: no joint, and easy to hot pressing, cutting, gluing, laminating and other processing.
Shockproof: high resilience and tensile strength, strong toughness, with good shockproof/buffer performance.
You can buy the full size sheet. The standard size of our sheet is 2.4M*1.2M*6MM( about 2.88 sqm ).
Using a sharp bit to cut the sheet according to the shape of your boat.
If you don't have CNC machine and want to make your boat floor more beautiful, you can send us the CAD file of your boat flooring for this customization.
If you need customized color please tell me the pantone number, thank you.
You can also choose the following pattern.
Packing:
FAQ:
How can I get a sample?
We can send the free small samples to you. Just need you pay the tracking fee.
Please check the sample details of you like. Such as the color, texture, back adhesive.
Please help to send your expressed account to us.
If you not have the expressed account, please send me the detail address to checking the shipping fee for you.
How long will it stayed adhered?
With proper surface preparation and installation, a minimum of 5-7 years can be expected.
If I choose to remove the pad how do I do this?
Komin marine flooring is designed for a semi-permanent installation, but can be removed. The best method is to use a plastic putty knife to get under one corner, then grip and pull off. If the PE/EVA seems to be sticking and tearing, apply small amounts of acetone to the PSA and continue lifting with the putty knife. You may want to enlist another set of hands to assist. Once the entire pad is removed, there will be a small amount of PSA left on the surface. Soak with mineral spirits for 10 minutes, scrap with the plastic putty knife and a rag. Once the PSA has been removed, use acetone to remove the mineral spirits.